About Us

Our company B&D Dental Corp has been manufacturing zirconia disks since 2010 and we are well known for our high quality prosthetic dental products Live, Beyond, and Beyond Plus. While developing zirconia disks, we realized how important the sintering process actually is. As an active dental laboratory manufacturer, we know how critical it is to achieve accurate shades. There are many factors that determine what shade is produced: Zirconia disk’s density, powder compositions, Yittria amount, sintering temperature, etc.

One of the most important things that a dental laboratory can control is the sintering process. If the temperature is too high, the shade comes out lighter, and if it is too low, the shade comes out darker. Heat holding time is also important. Depending on the sintering cycle, you can achieve much more natural looking crowns.

That’s why we developed the AccuSinter oven. Our first model was the DuoTron, then the DuoTron Pro, and now finally, we have developed AccuSinter. AccuSinter has been intentionally designed with a smaller chamber size for better heat distribution control. When there is a bigger chamber, the lower part of the chamber and the higher part of chamber have different temperatures. Some other ovens that we tested had temperature differences of 40 degrees or more. AccuSinter’s top side and bottom side difference is only 10 degrees. 

AccuSinter has been designed and programmed with a user-friendly layout in mind, and as a result of our quality control system, AccuSinter has impeccable performance compared to our competitors.

If you have any further questions or concerns, please call 800-281-4012 or send us a message on our contact page. We hope to work with you soon!