AccuSinter Furnace by B&D Dental Technologies

Fast Zirconia Sintering

• Increases zirconia production speeds & decreases production costs
• Cost-efficient and environment-friendly
• Compact design, requiring less equipment space
• Consistent zirconia pigment color
• Eliminate contamination and build-up

Heating Elements

MoSi2 (Molybdenum Disilicide).

Controlled Temperature Release

The sintering platform is released once the chamber is cooled to a pre-set temperature. This feature ensures that the sintered zirconia is cooled in a controlled manner and is not subject to sudden temperature changes during cooling. The pre-set platform release can be adjusted to specific laboratory needs.

Sintering Tray Cover

The use of the alumina sintering tray cover is a primary factor for preventing occasional zirconia discoloring that may otherwise occur due to the heating elements.

Maximum 3 Trays

Each round 95 mm diameter tray can hold an average of 25 single units. A maximum of 3 trays can be stacked up during one cycle time. The bottom support tray elevates the sintering trays to provide even heat and should have no zirconia units placed inside it.

Create Your Own Custom Graph in Addition to the Pre-set Parameters

Simply enter the temperature setting of your preferred zirconia brand, and the DuoTron Pro will create your graph automatically. You can make the heat up and cooling time shorter or longer depending on the nature of the case.